$88.00
Need this in a rush? use the link below for same day processing https://www.etsy.com/listing/970858691/same-day-rush-service-same-day We have received mixed reviews on these. Some people swear by it and others not so...
Need this in a rush? use the link below for same day processing
https://www.etsy.com/listing/970858691/same-day-rush-service-same-day
We have received mixed reviews on these. Some people swear by it and others not so much. See video for up to date images.
Single - 1 wick
Multi - up to 3 wicks
Multi : Fits containers with an inside neck diameter of 2.75 to 3.75 inches. Pairs well with our 8 oz. and 16 oz. Apothecary Jars.
Can also be used to set a single wick.
Single : The EZ wick setter fits containers with an inside neck diameter of 1.75 to 3.10 inches.
Multi “EZ Wick Setter”
TM Assembly, Set-up and Operating
Instructions
Congratulations on the purchase of your new Multi “EZ Wick Setter“TM. We are certain you will love its versatility and ease of use. The simple instructions are included below.
Assembly
Check the parts list below to insure you have all of the required parts.
Parts list:
1-tool body
3-wick tube assemblies 3-springs
1 Determine the desired spacing of your wicks. There are several holes (spaced at 3/8” increments) for different spacing requirements.
2. Insert wick tube assemblies from the bottom (smaller end) of your tool body.
3. Slide springs over the top of the wick tube assembly.
4. Slide spacers over the top of the wick tube assembly.
5. Slide collars over the top of the wick tube assembly.
6. Push a knob onto the top of each wick tube.
Your Multi “EZ Wick Setter” TM is now ready for use. Your Multi “EZ Wick Setter” TM may be reconfigured for different wicking patterns.
Set-up
1. Place the Multi “EZ Wick Setter” TM in your container. *(See note below.)
2. Loosen thumbscrews and allow wick tube assemblies to rest on the bottom of your container.
3. Push collar down as far as it will go and tighten thumbscrews.
Your tool is now set up for that size container.
*Note: Should your tool not fit your container, you may return it to us along with your container and we will modify it to fit and return it to you at no charge. Email us at ezwicksys@houston.rr.com for shipping instructions.
Operation
Prepare your wicks by applying the adhesive of your choice to the bottom of your wick tabs. We recommend wick stickers TM, a product available from your supplier.
1. Insert a wick into the bottom of each wick tube. The magnet will hold the wicks in place while positioning the tool in your container.
2. While holding the tool on your container, depress each wick tube knob firmly, setting the wicks in your container.
3. Repeat steps 1 & 2 for each container.
That’s it! Your wicks are now perfectly spaced and seated in your container.
Note: To prevent damage to your wick tubes, always handle your tool by the body instead of by the wick tubes.
$132.00
